:	Jul 12, 2004

.

Disconnect the battery ground cable.

.

: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands. Raise and support the vehicle.

.

Remove the generator.

.

Disconnect the ground cable.   Remove the ground cable retaining bolt.

.

Remove the engine mount bracket.   Remove the nut.

.

: Protect the engine during this operation. Detach the engine mounting bracket.   Support the engine.   Remove the four retaining bolts.

.

Remove the engine mount.   Remove and discard the two retaining bolts.

.

Install the engine mount.   Clean the component mating faces.   Install new retaining bolts.   Tighten the two new bolts to 45 Nm (33 lb.ft), then a further 60 degrees.

.

Install the engine mount bracket.   Clean the component mating faces.   Tighten the four retaining bolts to 80 Nm (59 lb.ft).

.

Attach the engine mounting bracket.   Lower the engine onto its mount.   Tighten the nut to 90 Nm (66 lb.ft).

.

Connect the ground cable.   Install the retaining bolt.

.

Install the generator.

.

Connect the battery ground cable.